Inside the appliance
Beverage center temperature control. In plain English.
A Liebherr BCv 1103 countertop beverage cooler is set by a mechanical dial rather than a screen. Using a coin, turn the dial arrow to a number from 1 to 7: 1 is the warmest and 7 the coldest. The plus mark switches the refrigeration system off.

Where it fits.
Beverage center temperature control in the appliance
Temperature control T is inside the cooler; the thermometer is at the left of the inner compartment.
The image shows a typical example of this part. It does not say which replacement fits your model.
What changes when the cooling system needs attention.
Beverage center temperature control problems can show up as warmer shelves or an alarm that keeps returning. The part is tested before anyone decides it is the cause.

Liebherr beverage center not cold enough
When a Liebherr BCv 1103 beverage center is not cold enough, the manual points to the temperature dial, too much freshly loaded drink, an inaccurate thermometer, blocked ventilation and a nearby heat source. Check those in order, and book a technician when it still runs warm.

Liebherr beverage center loud running noise
A loud Liebherr BCv 1103 beverage center is often not standing firmly on the floor or is making nearby furniture or objects vibrate. Liebherr also says noise from the refrigerant circuit cannot be avoided. Check the footing and neighbors, then book a technician for a noise that stays loud.
Owner care, within the model instructions.
Unplug the appliance before any check of your own. Watch for meltwater on the floor and for frost-covered shelves that can stick to skin. Never touch a wet plug, open a cover or go beyond what your model's owner manual allows.
- 1
Use a coin
Turn the arrow on temperature control T to a position from 1 to 7.
- 2
Know the scale
Position 1 gives the highest temperature, and position 7 the lowest.
- 3
Read the thermometer
It sits to the left in the inner compartment. A separate thermometer can confirm a doubtful reading.
- 4
Check the load
If the cooler is not cold enough, Liebherr asks whether the dial is right and whether too much fresh food went in.
Cleaning or replacement?
Leave internal testing to a technician.
Drinks stay warm at a low setting, a sensible load and clear ventilation.
The cooler never runs although the plug and fuse are in order.
Arrange a diagnosticSources and model boundaries.
These documents support the Beverage center temperature control guidance. Pick the manual that matches your model.
- Operating instructions Countertop refrigerator BCv 1103, 708 4913-00
Keep the manual for your exact model handy. See how we research these pages.
Does the BCv 1103 show error codes?
No. It has a mechanical dial and a thermometer, and its malfunction list contains no codes.
Which dial position is coldest?
Position 7 is the coldest. Position 1 is the warmest.
What does the plus mark do?
Liebherr says it stops the refrigeration system, though the cooler stays connected to the mains.
How do I switch it fully off?
Pull the mains plug. Liebherr says that switches the cooler off.
Liebherr alarms, symptoms, cooling parts, repair visits
From the message to what to do next.
Liebherr beverage center not cold enough
When a Liebherr BCv 1103 beverage center is not cold enough, the manual points to the temperature dial, too much freshly loaded drink, an inaccurate thermometer, blocked ventilation and a nearby heat source. Check those in order, and book a technician when it still runs warm.
Beverage center repair
Book a diagnostic for your exact model, carried out beside the unit.
Find your metro
Office details, plus the access notes to pass on to us.

