Inside the appliance
Beverage center LED lighting. In plain English.
The Liebherr BCv 1103 lights its interior with LED strips. On models with a dimmer, a coin or screwdriver in the knob slot turns the brightness up or down. Liebherr says only the customer service technician or competent personnel may replace the lighting.

Where it fits.
Beverage center LED lighting in the appliance
LED strips lighting the interior of the cooler.
The image shows a typical example of this part. It does not say which replacement fits your model.
What changes when the cooling system needs attention.
Beverage center LED lighting problems can show up as warmer shelves or an alarm that keeps returning. The part is tested before anyone decides it is the cause.

Liebherr beverage center not cold enough
When a Liebherr BCv 1103 beverage center is not cold enough, the manual points to the temperature dial, too much freshly loaded drink, an inaccurate thermometer, blocked ventilation and a nearby heat source. Check those in order, and book a technician when it still runs warm.

Liebherr beverage center loud running noise
A loud Liebherr BCv 1103 beverage center is often not standing firmly on the floor or is making nearby furniture or objects vibrate. Liebherr also says noise from the refrigerant circuit cannot be avoided. Check the footing and neighbors, then book a technician for a noise that stays loud.
Owner care, within the model instructions.
Unplug the appliance before any check of your own. Watch for meltwater on the floor and for frost-covered shelves that can stick to skin. Never touch a wet plug, open a cover or go beyond what your model's owner manual allows.
- 1
Adjust the brightness
On models with a dimmer, put a coin or screwdriver in the knob slot. Turn clockwise for brighter light and anti-clockwise for dimmer.
- 2
Do not look into the light
The LED corresponds to laser class 1M. With the cover removed, do not look at it through optical instruments.
- 3
Leave strips alone
Liebherr says not to try to change the LED strips yourself.
- 4
Know your model
Liebherr says the brightness control only applies to appliances with a dimmer, so a plain model has no knob.
Cleaning or replacement?
Leave internal testing to a technician.
The LED strips stay dark although the cooler has power.
The LED cover is damaged or loose.
Arrange a diagnosticSources and model boundaries.
These documents support the Beverage center LED lighting guidance. Pick the manual that matches your model.
- Operating instructions Countertop refrigerator BCv 1103, 708 4913-00
Keep the manual for your exact model handy. See how we research these pages.
Can I replace the LED myself?
No. Liebherr says the lighting may only be replaced by the customer service technician or competent skilled personnel.
Does every model dim?
No. Liebherr says the brightness control applies only to appliances with a dimmer.
What is laser class 1M?
It is Liebherr's classification of the LED intensity. Do not look at it through optical instruments with the cover off.
When do I book?
Book when the LED strips do not light with power present, or the cover is damaged.
Liebherr alarms, symptoms, cooling parts, repair visits
From the message to what to do next.
Liebherr beverage center not cold enough
When a Liebherr BCv 1103 beverage center is not cold enough, the manual points to the temperature dial, too much freshly loaded drink, an inaccurate thermometer, blocked ventilation and a nearby heat source. Check those in order, and book a technician when it still runs warm.
Beverage center repair
Book a diagnostic for your exact model, carried out beside the unit.
Find your metro
Office details, plus the access notes to pass on to us.

