DemoMode on a Liebherr Monolith freezer column is a showroom setting that runs the display like normal while the cooling circuit is switched off. If your column is warm and shows a normal display, check for DemoMode, then book a visit with us.
DemoMode on a Liebherr Monolith freezer column is a showroom setting that runs the display like normal while the cooling circuit is switched off. If your column is warm and shows a normal display, check for DemoMode, then book a visit with us.
DemoMode on a Liebherr Monolith freezer column is a showroom setting that runs the display like normal while the cooling circuit is switched off. If your column is warm and shows a normal display, check for DemoMode, then book a visit with us.
What you can safely check
A freezer in DemoMode is not cooling.
When to call a technician
The column shows a normal display but is not cold.
Your Liebherr steps, stored on this device alone
Safe checks, in order.
0 of 3 checks done
Illustration. Follow your model’s instructions.
Before you begin
Know what it does
Liebherr built DemoMode for presenting the appliance at exhibitions or in salesrooms as if it were running normally. The guide notes the cooling circuit is switched off.
Illustration. Follow your model’s instructions.
Check 2
Check the menu
DemoMode is switched on and off from the additional-functions menu with a code. The guide shows the deactivation sequence in pictures on its page 28.
Illustration. Follow your model’s instructions.
Check 3
Protect the food
A column in DemoMode does not cool. Move food to working cold storage until it is sorted out.
Still showing DemoMode?
Give us the model number and what you have already tried, then start your request below.
A simplified drawing of a cooling unit; the inside differs between built-in, freestanding and column models. Tap any outlined part to open its photo and the check that belongs to it.
Begin with the first check: Liebherr built DemoMode for presenting the appliance at exhibitions or in salesrooms as if it were running normally. The guide notes the cooling circuit is switched off.
DemoMode is not an alarm and not a failed part. A Temperature alarm or Power failure alarm appears when something happened to the temperature; DemoMode is a setting someone, or the showroom, left switched on.
Liebherr-Hausgeräte (US market edition; linked from https://www.liebherr.com/en-us/p/egn-9171-3033453)
Models: MF 1851, MF 2451, MF 3051, MF 3651
PDF creation date Wed Jun 21 13:59:01 2023 EEST; file tag EGN9671_237; cover: MF 1851 / MF 2451 / MF 3051 / MF 3651, 7085 979-00 / PDF p. 27, PDF p. 25, PDF p. 28
Applies to Monolith freezer columns MF 1851 / MF 2451 / MF 3051 / MF 3651. Source: Use and Care Manual Freezer, checked November 2026.
DemoMode runs the appliance as if it were in normal operation for exhibitions or showrooms. The guide notes the cooling circuit is switched off.
What do I do first about DemoMode?
Liebherr built DemoMode for presenting the appliance at exhibitions or in salesrooms as if it were running normally. The guide notes the cooling circuit is switched off.
What tells me DemoMode needs a visit?
Any of these: The column shows a normal display but is not cold. DemoMode will not switch off from the menu.