Liebherr freezer Temperature alarm / Temperature and alarms

Liebherr freezer
error Temperature alarm

Freezer / display referenceTemperature alarm

Temperature alarm on a Liebherr freezer means the freezing temperature does not match the set temperature. On Touch & Swipe models, the display can show the warmest reading reached; above -9 °C (16 °F), check the food. Book a technician if the alarm comes back once the cause is cleared.

Also shown as Temperature alarm

Last reviewed

Freezer / display referenceTemperature alarm
Meaning
Temperature alarm on a Liebherr freezer means the freezing temperature does not match the set temperature. On Touch & Swipe models, the display can show the warmest reading reached; above -9 °C (16 °F), check the food. Book a technician if the alarm comes back once the cause is cleared.
Who handles it
Check, then book
Source
User Guide

What Liebherr freezer Temperature alarm means.

What it means

Temperature alarm on a Liebherr freezer means the freezing temperature does not match the set temperature. On Touch & Swipe models, the display can show the warmest reading reached; above -9 °C (16 °F), check the food. Book a technician if the alarm comes back once the cause is cleared.

What you can safely check

Keep the freezer door shut while you work out the cause, so less warm air flows in.

When to call a technician

The alarm returns after the cause is cleared and the freezer has had time to cool.

Your Liebherr steps, stored on this device alone

Safe checks, in order.

0 of 4 checks done
  1. Liebherr freezer Temperature alarm: Freezers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Before you begin

    Read the warmest temperature

    On a Touch & Swipe freezer, touch the display to open the warning, then touch again to see the warmest freezing temperature reached.

  2. Bottles resting on wooden shelves inside a wine cabinet
    Illustration. Follow your model’s instructions.
    Check 2

    Apply the food rule

    The guide says food can still be eaten if the temperature stayed below -9 °C (16 °F). If it went above that, check the food before you use it.

  3. A technician holds a tablet showing a blank checklist beside an open, empty refrigerator in a wood-paneled kitchen.
    Illustration. Follow your model’s instructions.
    Check 3

    Remove the cause

    Liebherr names warm fresh food, a lot of room air let in while rearranging, a long power outage and a defective appliance. Once the cause is gone, the freezer cools back to its target.

  4. A technician checking evaporator frost behind a panel
    Illustration. Follow your model’s instructions.
    Check 4

    Monolith columns

    A Monolith freezer column shows a Temperature Alarm screen when the inside temperature was too high. Check the quality of what is stored; the alarm clears when the set temperature is reached.

Still showing Temperature alarm?

Give us the model number and what you have already tried, then start your request below.

Book a visit

Cooling and defrost.

Conceptual Refrigerator sectionEvaporatorEvaporator fanDefrost heaterDrain panControl12345
  1. 1Evaporator
  2. 2Evaporator fan
  3. 3Defrost heater
  4. 4Drain pan

A simplified drawing of a cooling unit; the inside differs between built-in, freestanding and column models. Tap any outlined part to open its photo and the check that belongs to it.

A little more context.

What does Temperature alarm mean on a Liebherr freezer?

Temperature alarm means the freezing temperature does not match the set temperature. Liebherr prints it as a warning on Touch & Swipe freezers, and Monolith columns show a Temperature Alarm screen after the inside temperature was too high.

Read the supporting manual

What can I check before booking a technician?

Begin with the first check: on a Touch & Swipe freezer, touch the display to open the warning, then touch again to see the warmest freezing temperature reached.

Read the supporting manual

Is it fine to keep using the freezer with this showing?

Keep the door shut while you work out the cause. Each opening lets warm air in and prolongs the alarm.

Read the supporting manual

How is Temperature alarm different from the messages near it?

Temperature alarm is about the inside temperature. Power failure alarm names an outage and Door alarm is about how long the door stayed open.

Read the supporting manual

The manual behind the message.

Manufacturer document

User Guide

Liebherr-Hausgeräte (US market edition; linked from https://www.liebherr.com/en-us/p/sfnsth-529i-3033451)

Models: SF 5291, SFNsth 529i

PDF creation date Mon Nov 10 12:53:16 2025 EET; file tag SFNsth529i_237; cover: SF 5291; US product page SFNsth 529i / PDF p. 23, PDF p. 22

Manufacturer document

User Guide

Liebherr-Hausgeräte (US market edition; linked from https://www.liebherr.com/en-us/p/sufnh-365i-3033453)

Models: SUFNc 375i, SUFNd 365i, SUFNh 365i

PDF creation date Mon Sep 7 07:30:39 2026 EEST; file tag SUFNh365i_237; cover: SUFNc 375i, SUFNd 365i; US product page SUFNh 365i / PDF p. 18

Manufacturer document

Use and Care Manual Freezer

Liebherr-Hausgeräte (US market edition; linked from https://www.liebherr.com/en-us/p/egn-9171-3033453)

Models: MF 1851, MF 2451, MF 3051, MF 3651

PDF creation date Wed Jun 21 13:59:01 2023 EEST; file tag EGN9671_237; cover: MF 1851 / MF 2451 / MF 3051 / MF 3651, 7085 979-00 / PDF p. 18

Applies to Liebherr Touch & Swipe freezers (SF 5291, SUFNc 375i / SUFNd 365i) and Monolith freezer columns (MF 1851 to MF 3651). The -9 °C food rule is printed only in the Touch & Swipe guides. Sources: two User Guide files and the Monolith Use and Care Manual Freezer, checked November 2026.

Here to help

Good questions.
Clear answers.

Talk to our team
On a Liebherr freezer, what does Temperature alarm mean?

Temperature alarm means the freezing temperature does not match the set temperature. Liebherr prints it as a warning on Touch & Swipe freezers, and Monolith columns show a Temperature Alarm screen after the inside temperature was too high.

What do I do first about Temperature alarm?

On a Touch & Swipe freezer, touch the display to open the warning, then touch again to see the warmest freezing temperature reached.

What tells me Temperature alarm needs a visit?

Any of these: The alarm returns after the cause is cleared and the freezer has had time to cool. The display keeps showing a temperature well above the target. The alarm shows again and no cause on the guide's list applies.

Which Liebherr models does this cover?

Applies to Liebherr Touch & Swipe freezers (SF 5291, SUFNc 375i / SUFNd 365i) and Monolith freezer columns (MF 1851 to MF 3651). The -9 °C food rule is printed only in the Touch & Swipe guides.

What is the food rule?

Liebherr's guide says food can still be eaten if the temperature stayed below -9 °C (16 °F). Above it, check the food before you use it.

How long should I wait before booking?

Give the freezer time to cool after the cause is gone. If the alarm returns, or the display stays well above target, book a visit.

Let’s take care of it.

Food and wine do not wait.
Book the check.