Liebherr freezer Power failure alarm / Power and voltage
Liebherr freezer error Power failure alarm
Freezer / display referencePower failure alarm
Power failure alarm on a Liebherr freezer appears when the freezing temperature rose because of a power outage. Once power is back the freezer cools on its own, but you still confirm the message to clear it. Check the food. A message that returns although the power held steady calls for a technician.
Power failure alarm on a Liebherr freezer appears when the freezing temperature rose because of a power outage. Once power is back the freezer cools on its own, but you still confirm the message to clear it. Check the food. A message that returns although the power held steady calls for a technician.
Power failure alarm on a Liebherr freezer appears when the freezing temperature rose because of a power outage. Once power is back the freezer cools on its own, but you still confirm the message to clear it. Check the food. A message that returns although the power held steady calls for a technician.
What you can safely check
After an outage with SabbathMode on, Liebherr warns of food poisoning from spoiled food: do not eat food that thawed and refroze.
When to call a technician
The message returns although the power has been steady.
Your Liebherr steps, stored on this device alone
Safe checks, in order.
0 of 4 checks done
Illustration. Follow your model’s instructions.
Before you begin
Confirm the message
After power returns the freezer cools to its earlier target without help, but the message stays on the display until you confirm it by touch.
Illustration. Follow your model’s instructions.
Check 2
Read the warmest temperature
Touch the display for details, then touch again to see the warmest freezing temperature. Below -9 °C (16 °F) the guide says food can still be eaten; above it, check the food.
Illustration. Follow your model’s instructions.
Check 3
Know the SabbathMode gap
With SabbathMode on, a power failure produces no message in the status display. The guide warns that food may have spoiled, so do not consume food that froze, thawed and froze again.
Illustration. Follow your model’s instructions.
Check 4
Monolith columns
A Monolith column shows Power Alarm when the power supply was interrupted. Check the quality of the stored food; the alarm display goes once the set temperature is reached.
Still showing Power failure alarm?
Give us the model number and what you have already tried, then start your request below.
A simplified drawing of a cooling unit; the inside differs between built-in, freestanding and column models. Tap any outlined part to open its photo and the check that belongs to it.
What does Power failure alarm mean on a Liebherr freezer?
Power failure alarm appears if the freezing temperature increases due to a power outage. Monolith freezer columns print the same event as Power Alarm, after the power supply was interrupted.
Begin with the first check: after power returns the freezer cools to its earlier target without help, but the message stays on the display until you confirm it by touch.
Is it fine to keep using the freezer with this showing?
With SabbathMode on, a power failure produces no message in the status display, so food may have spoiled unseen. Liebherr warns of food poisoning from food that froze, thawed and froze again.
How is Power failure alarm different from the messages near it?
Power failure alarm names an outage as its cause. Temperature alarm has several possible causes, such as warm fresh food or a lot of room air let in, and has its own page.
Liebherr-Hausgeräte (US market edition; linked from https://www.liebherr.com/en-us/p/sfnsth-529i-3033451)
Models: SF 5291, SFNsth 529i
PDF creation date Mon Nov 10 12:53:16 2025 EET; file tag SFNsth529i_237; cover: SF 5291; US product page SFNsth 529i / PDF p. 22, PDF p. 15
Manufacturer document
User Guide
Liebherr-Hausgeräte (US market edition; linked from https://www.liebherr.com/en-us/p/sufnh-365i-3033453)
Models: SUFNc 375i, SUFNd 365i, SUFNh 365i
PDF creation date Mon Sep 7 07:30:39 2026 EEST; file tag SUFNh365i_237; cover: SUFNc 375i, SUFNd 365i; US product page SUFNh 365i / PDF p. 18
Manufacturer document
Use and Care Manual Freezer
Liebherr-Hausgeräte (US market edition; linked from https://www.liebherr.com/en-us/p/egn-9171-3033453)
Models: MF 1851, MF 2451, MF 3051, MF 3651
PDF creation date Wed Jun 21 13:59:01 2023 EEST; file tag EGN9671_237; cover: MF 1851 / MF 2451 / MF 3051 / MF 3651, 7085 979-00 / PDF p. 18
Applies to Liebherr Touch & Swipe freezers (SF 5291, SUFNc 375i / SUFNd 365i) and Monolith freezer columns (MF 1851 to MF 3651, shown as Power Alarm). Sources: two User Guide files and the Use and Care Manual Freezer, checked November 2026.
On a Liebherr freezer, what does Power failure alarm mean?
Power failure alarm appears if the freezing temperature increases due to a power outage. Monolith freezer columns print the same event as Power Alarm, after the power supply was interrupted.
What do I do first about Power failure alarm?
After power returns, the freezer cools to its earlier target by itself. You only confirm the message so that it leaves the display.
What tells me Power failure alarm needs a visit?
Any of these: The message returns although the power has been steady. The freezer does not return to its set temperature after power is back.
Which Liebherr models does this cover?
Applies to Liebherr Touch & Swipe freezers (SF 5291, SUFNc 375i / SUFNd 365i) and Monolith freezer columns (MF 1851 to MF 3651, shown as Power Alarm).
Do I need to reset the freezer after an outage?
No. It returns to its earlier target on its own. You only confirm the message on the display.
What if the message returns with steady power?
That is the cue to book a visit. A power failure message with no outage is not explained by the guide.