Inside the appliance
IceMaker drawer. In plain English.
Cubes from a Liebherr IceMaker drop into a drawer inside the freezer. With that drawer open the IceMaker stops, and pushing it fully in restarts ice making by itself. Production also halts at a set fill level, never filling the drawer to the brim.

Where it fits.
IceMaker drawer in the appliance
In the freezer section; on column units the IceMaker drawer, on the HCB 2092G the upper right drawer.
The image shows a typical example of this part. It does not say which replacement fits your model.
What changes when the cooling system needs attention.
IceMaker drawer problems can show up as warmer shelves or an alarm that keeps returning. The part is tested before anyone decides it is the cause.
Owner care, within the model instructions.
Unplug the appliance before any check of your own. Watch for meltwater on the floor and for frost-covered shelves that can stick to skin. Never touch a wet plug, open a cover or go beyond what your model's owner manual allows.
- 1
Close the drawer
When the display says Push in the IceMaker drawer, shut it. Liebherr says the IceMaker then makes ice again.
- 2
Use the dividers
Move or remove the separators in the drawer for a big batch of cubes, and spread the cubes evenly.
- 3
Know the stop level
Liebherr says ice making pauses at a certain level in the drawer, short of the very top.
- 4
Free the space if needed
With the IceMaker deactivated, the whole drawer works as an ordinary freezer drawer.
Cleaning or replacement?
Leave internal testing to a technician.
The reminder stays on with the drawer pushed fully in.
No ice appears even after you close the drawer and check the water connection.
Arrange a diagnosticSources and model boundaries.
These documents support the IceMaker drawer guidance. Pick the manual that matches your model.
- User Guide, IceMaker drawer sections (CBNsth 779i)
- Use and Care Manual for NoFrost Combined Refrigerator-Freezers with IceMaker (HCB 2092G / CBS 2092G)
Keep the manual for your exact model handy. See how we research these pages.
What does Push in the IceMaker drawer mean?
Liebherr says the IceMaker is on but its drawer is open. Close the drawer, or deactivate the IceMaker if you do not need ice.
Why does the ice stop below the top?
Liebherr says the IceMaker pauses at a certain level and does not fill the drawer to the top.
Can the drawer hold other food?
Yes, once the IceMaker is deactivated. Liebherr says you can then use the entire drawer as a freezer drawer.
Where is the IceMaker on a combined unit?
On the HCB 2092G Liebherr places it in the upper freezer drawer on the right, beside a partition wall for the cubes.
Liebherr alarms, symptoms, cooling parts, repair visits
From the message to what to do next.
Push in the IceMaker drawer
Push in the IceMaker drawer is a reminder on Liebherr Touch & Swipe models. It means the IceMaker is active but its drawer is open. Push the drawer in, or deactivate the IceMaker. Once the drawer is in, the IceMaker produces ice cubes again.
Liebherr IceMaker not making ice cubes
For a Liebherr IceMaker that is not making ice cubes, the user guide lists three causes: the IceMaker is not switched on, its drawer is not closed properly, or the water connection is not open. Fix whichever applies. If the freezer also shows Check water connection, the guide adds a cleaning step. Otherwise, book a technician.
Ice maker repair
Book a diagnostic for your exact model, carried out beside the unit.
Find your metro
Office details, plus the access notes to pass on to us.

