Inside the appliance
IceMaker. In plain English.
Liebherr's IceMaker makes ice in an interior drawer. Its guides list the checks for no ice: switch it on, close the drawer fully and open the water connection. A flashing IceMaker LED means no water supply reaches the unit.

Where it fits.
IceMaker in the appliance
In the top drawer of the MF Monolith freezer columns. On the HCB 2092G the cubes fall into a drawer in the freezer compartment.
The image shows a typical example of this part. It does not say which replacement fits your model.
What changes when the cooling system needs attention.
IceMaker problems can show up as warmer shelves or an alarm that keeps returning. The part is tested before anyone decides it is the cause.
Owner care, within the model instructions.
Unplug the appliance before any check of your own. Watch for meltwater on the floor and for frost-covered shelves that can stick to skin. Never touch a wet plug, open a cover or go beyond what your model's owner manual allows.
- 1
Is it on
Liebherr's table lists an IceMaker that is not switched on as the first cause of no ice.
- 2
Drawer and water
Close the IceMaker drawer fully and open the water connection. Liebherr's HCB 2092G manual says to check the supply shut-off valve if the LED flashes.
- 3
Give it time
Liebherr says the first ice can take up to 24 hours. It also says not to use the first three batches of ice.
Cleaning or replacement?
Leave internal testing to a technician.
The LED keeps flashing with the supply valve open.
The display says IceMaker failure and the IceMaker is off.
Arrange a diagnosticSources and model boundaries.
These documents support the IceMaker guidance. Pick the manual that matches your model.
- User Guide
- User Guide
- Use and Care Manual For “NoFrost” Combined Refrigerator-Freezers with IceMaker
- Use and Care Manual Freezer
- User Guide
Keep the manual for your exact model handy. See how we research these pages.
Why is there no ice?
Liebherr lists three causes: IceMaker off, drawer not properly closed, water connection not open.
What does a flashing IceMaker LED mean?
On the HCB 2092G manual: the ice maker is not being supplied with water. Check the shut-off valve.
What is IceMaker failure?
On the Monolith freezers it means the IceMaker is disabled. The display gives a failure number for service.
Is the first ice safe to use?
Liebherr says not to consume or use the first three batches of ice, including after a long idle period.
Liebherr alarms, symptoms, cooling parts, repair visits
From the message to what to do next.
IceMaker failure
IceMaker failure on a Liebherr Monolith freezer column means the ice maker is disabled. The guide says there is no need to move food to another appliance and to give the failure number to service. Keep the number handy and arrange a technician visit.
Liebherr IceMaker not making ice cubes
For a Liebherr IceMaker that is not making ice cubes, the user guide lists three causes: the IceMaker is not switched on, its drawer is not closed properly, or the water connection is not open. Fix whichever applies. If the freezer also shows Check water connection, the guide adds a cleaning step. Otherwise, book a technician.
Ice maker repair
Book a diagnostic for your exact model, carried out beside the unit.
Find your metro
Office details, plus the access notes to pass on to us.


