Inside the appliance
Interior LED light. In plain English.
Liebherr's tables say the interior light stays off if the unit is off or the door has been open over 15 minutes, when it switches off by itself. A damaged LED or cover is a case for a technician.

Where it fits.
Interior LED light in the appliance
Inside the cabinet. Liebherr's overview lists the lighting beside the control elements.
The image shows a typical example of this part. It does not say which replacement fits your model.
What changes when the cooling system needs attention.
Interior LED light problems can show up as warmer shelves or an alarm that keeps returning. The part is tested before anyone decides it is the cause.

Liebherr freezer not cold enough
A Liebherr freezer that runs warm often has a simple cause that the user guide lists: a door left ajar, a blocked ventilation grille, a hot room, a heat source nearby, too much fresh food added without SuperFrost, or a setting that is too warm. Work through that list. If it stays warm, book a technician.

Liebherr freezer does not work or will not turn on
If a Liebherr freezer is dead, the user guide lists four things for the owner to rule out first: the freezer was never switched on, the plug is not seated in the wall socket, the fuse behind that socket is not good, or the IEC socket on the back is not plugged in properly. After those, book a technician. Keep the door shut meanwhile.
Owner care, within the model instructions.
Unplug the appliance before any check of your own. Watch for meltwater on the floor and for frost-covered shelves that can stick to skin. Never touch a wet plug, open a cover or go beyond what your model's owner manual allows.
- 1
Is the unit on
Liebherr's first listed cause of a dark interior is an appliance that is not switched on.
- 2
Check the door
Close the door. Liebherr says the light goes off automatically after about 15 minutes with the door open.
- 3
Look at the cover
If the LED or its cover looks damaged, stop and book a visit.
Cleaning or replacement?
Leave internal testing to a technician.
The unit is on, the door has been closed and the light stays dark.
The light cover is cracked.
Arrange a diagnosticSources and model boundaries.
These documents support the Interior LED light guidance. Pick the manual that matches your model.
- User Guide
- User Guide
- User Guide
- User Guide
Keep the manual for your exact model handy. See how we research these pages.
Why does the light go out with the door open?
Liebherr says it switches off automatically after about 15 minutes.
Can I change the bulb?
Liebherr's tables say a failed LED or damaged lid is a case for its customer service. We handle it on a visit.
Does the light pulse?
On some warnings and reminders Liebherr says the interior lighting pulses.
Is the light off in SabbathMode?
Yes. Liebherr's CBNsth 779i guide says interior lighting is deactivated in SabbathMode.
Liebherr alarms, symptoms, cooling parts, repair visits
From the message to what to do next.
Liebherr refrigerator not cold enough
If a Liebherr refrigerator is not cold enough, the user guides list the same few causes: the door is not closed properly, the room is too warm, the door has been opened too often or too long, the temperature is set too warm, a heat source is close, or too much fresh food went in. Check those first. If it stays warm, book a technician.
Refrigerator repair
Book a diagnostic for your exact model, carried out beside the unit.
Find your metro
Office details, plus the access notes to pass on to us.

