Start from the symptom
Liebherr refrigerator not cold enough.
If a Liebherr refrigerator is not cold enough, the user guides list the same few causes: the door is not closed properly, the room is too warm, the door has been opened too often or too long, the temperature is set too warm, a heat source is close, or too much fresh food went in. Check those first. If it stays warm, book a technician.

Start with safe observations.
Unplug the appliance before any check of your own. Watch for meltwater on the floor and for frost-covered shelves that can stick to skin. Never touch a wet plug, open a cover or go beyond what your model's owner manual allows.
- 1
Close the door fully
The Touch & Swipe guide puts a door left ajar first. Check shelves and bottles that may keep it ajar.
- 2
Review the setting
The Use and Care Manual asks whether the temperature setting is correct. The Touch & Swipe guide says to set it colder and check after 24 hours.
- 3
Think about heat and loading
Look at the ambient temperature, a stove or heater close by, and a large amount of fresh food just added. Liebherr lists each one.
- 4
Compare with a thermometer
The Use and Care Manual asks whether a separately installed thermometer shows the correct reading. A display and a loose thermometer can disagree.
- 5
Check ventilation
The manual asks whether the ventilation system is working properly. Keep every ventilation opening free of obstruction.
Systems a technician may investigate.
These cooling parts relate to the symptom, though what you noticed cannot show that any single one has broken.

Ventilation grille
Liebherr's wine cabinet guide lists insufficient ventilation as a cause of poor cooling, and the remedy is to clear and clean the ventilation grille. On other models the grille covers a dust filter or a water filter.

Fan and air vents
Liebherr's manuals tell owners to keep the air vents on the fan free and never block its air slits. A whirring or murmuring sound is listed as normal operation. A wine cooler fan may also run while its compressor is idle.
Read the related care guide.

Liebherr door alarm: set the delay that suits you.
A Liebherr door alarm sounds when the door stays open too long. On the SF 5291 freezer and the W5250 and UW 3710 wine cabinets you pick 1, 2 or 3 minutes, or off, and the alarm is on at delivery. The HW wine coolers sound after 180 seconds. [1][3][4][6]

Find the service number on your Liebherr.
Open the appliance information screen on a Touch model, or look for the plate inside the appliance: behind the drawers on the SF 5291, bottom of the interior on the URh 375i and UW 3710, bottom left on the W5250. It lists the name, the service number and the serial number. [1][2][3][4]
When observation becomes a service request.
Leave internal testing to a technician.
The refrigerator is still warm 24 hours after a colder setting.
The temperature does not correct itself once the door and loading causes are removed.
A Temperature alarm or Error message is on the display.
Arrange a diagnosticSources and model boundaries.
These documents support the Liebherr refrigerator not cold enough guidance. Pick the manual that matches your model.
- User Guide
- Use and Care Manual For Refrigerators
Keep the manual for your exact model handy. See how we research these pages.
How long after changing the setting should I wait?
The Touch & Swipe user guide says to set a colder temperature and check after 24 hours. If the refrigerator is still not cold, the owner's list is used up.
Does opening the door a lot warm a Liebherr refrigerator?
Yes. Opening it too often or for too long is a listed cause. The guide says to wait and see if the temperature corrects itself, and to call if not.
Could my refrigerator be too close to the oven?
That is on the list. Both guides name a heat source such as a stove or heater. Move the heat source or the appliance, as the Touch & Swipe guide says.
Why do I see Temperature alarm?
The refrigerator shows it when its temperature is off target. Read the message, remove the cause, and see our Temperature alarm page for what the display shows.
Liebherr alarms, symptoms, cooling parts, repair visits
From the message to what to do next.
Liebherr refrigerator Temperature alarm
Temperature alarm on a Liebherr refrigerator-freezer means the temperature in the freezer part drifted from its setting. On Touch & Swipe models, the display shows the warmest reading; above -9 °C (16 °F), check the food. Book a technician if the alarm returns after you clear the cause.
Liebherr refrigerator not cold enough
If a Liebherr refrigerator is not cold enough, the user guides list the same few causes: the door is not closed properly, the room is too warm, the door has been opened too often or too long, the temperature is set too warm, a heat source is close, or too much fresh food went in. Check those first. If it stays warm, book a technician.
Fan and air vents
Liebherr's manuals tell owners to keep the air vents on the fan free and never block its air slits. A whirring or murmuring sound is listed as normal operation. A wine cooler fan may also run while its compressor is idle.
Refrigerator repair
Book a diagnostic for your exact model, carried out beside the unit.
Find your metro
Office details, plus the access notes to pass on to us.