Liebherr freezer Error / Control board and communication
Liebherr freezer error Error
Freezer / display referenceError
Error on a Liebherr Touch & Swipe freezer means an appliance module reports an error. Touch the display to see the code and write it down. Liebherr's guides do not list what the codes mean, so book a technician with us and give the code.
Error on a Liebherr Touch & Swipe freezer means an appliance module reports an error. Touch the display to see the code and write it down. Liebherr's guides do not list what the codes mean, so book a technician with us and give the code.
Error on a Liebherr Touch & Swipe freezer means an appliance module reports an error. Touch the display to see the code and write it down. Liebherr's guides do not list what the codes mean, so book a technician with us and give the code.
What you can safely check
The guide gives no home steps for this message.
When to call a technician
Error appears on the display.
Your Liebherr steps, stored on this device alone
Safe checks, in order.
0 of 3 checks done
Illustration. Follow your model’s instructions.
Before you begin
Open the code
Touch the display briefly. The error code appears.
Illustration. Follow your model’s instructions.
Check 2
Write it down
Note the code exactly as shown, touch the display again to return to the status display, and add the model.
Illustration. Follow your model’s instructions.
Check 3
Book a visit
The guide ends the sequence with a call to Liebherr's own service line. With us, book a technician and read out the note you made.
Still showing Error?
Give us the model number and what you have already tried, then start your request below.
A simplified drawing of a cooling unit; the inside differs between built-in, freestanding and column models. Tap any outlined part to open its photo and the check that belongs to it.
Parts behind the message.
Component reference
Touch & Swipe display
Liebherr Touch & Swipe models are run from a touch display.
Is it fine to keep using the freezer with this showing?
The guide gives no home steps for this message. Keep the door closed so the cold holds, and check the freezer temperature display while you wait for the visit.
Error is not the Failure XX0000 screen that Monolith columns show. Error belongs to Touch & Swipe freezers and carries its own code; Failure XX0000 carries a failure number.
Liebherr-Hausgeräte (US market edition; linked from https://www.liebherr.com/en-us/p/sfnsth-529i-3033451)
Models: SF 5291, SFNsth 529i
PDF creation date Mon Nov 10 12:53:16 2025 EET; file tag SFNsth529i_237; cover: SF 5291; US product page SFNsth 529i / PDF p. 23, PDF p. 22
Manufacturer document
User Guide
Liebherr-Hausgeräte (US market edition; linked from https://www.liebherr.com/en-us/p/sufnh-365i-3033453)
Models: SUFNc 375i, SUFNd 365i, SUFNh 365i
PDF creation date Mon Sep 7 07:30:39 2026 EEST; file tag SUFNh365i_237; cover: SUFNc 375i, SUFNd 365i; US product page SUFNh 365i / PDF p. 19
Applies to Liebherr Touch & Swipe freezers (SF 5291, SUFNc 375i / SUFNd 365i). Sources: two User Guide files, checked November 2026. The numeric codes behind the message are not published.