What it means
F3 on a Liebherr HCB 2092G or CBS 2092G refrigerator-freezer means the appliance has a problem. The guide prints F1 to F5 on one line with no meaning for each number. Note that F3 shows, then book a technician and give us the number.
Liebherr refrigerator F3 / Control board and communication
F3 on a Liebherr HCB 2092G or CBS 2092G refrigerator-freezer means the appliance has a problem. The guide prints F1 to F5 on one line with no meaning for each number. Note that F3 shows, then book a technician and give us the number.
Also shown as F3
F3 on a Liebherr HCB 2092G or CBS 2092G refrigerator-freezer means the appliance has a problem. The guide prints F1 to F5 on one line with no meaning for each number. Note that F3 shows, then book a technician and give us the number.
The manual gives no safe-use statement for this group.
F3 shows on the display.
Your Liebherr steps, stored on this device alone

Copy that F3 is displayed, plus the model.

The manual explains the Power failure LED and the freezer display separately; note whether either is lit as well.

The guide gives one meaning for the whole range and no per-code steps. Book a technician and read out F3.
Give us the model number and what you have already tried, then start your request below.
Book a visit
A simplified drawing of a cooling unit; the inside differs between built-in, freestanding and column models. Tap any outlined part to open its photo and the check that belongs to it.
If F3 appears in the display, the guide says the appliance has a problem and asks you to have the number ready when you call service.
Read the supporting manualBegin with the first check: copy that F3 is displayed, plus the model.
Read the supporting manualThe manual gives no safe-use statement for this group. Check that the refrigerator and freezer feel cold, and move perishable food if they do not.
Read the supporting manualThis number is one of five sharing one meaning in the manual. It is not the Error message of Touch & Swipe models, and not the Failure XX0000 screen of Monolith units.
Read the supporting manualManufacturer document
Liebherr-Hausgeräte (US market edition)
Models: HCB 2092G, CBS 2092G
PDF creation date Fri Jan 10 14:22:16 2025 EET; file tag ECBN8872_337; cover: HCB 2092G / CBS 2092G NoFrost combined refrigerator-freezers with IceMaker, 7083 476-00; V: 01_2025 / PDF p. 11
Applies to the Liebherr HCB 2092G / CBS 2092G NoFrost combined refrigerator-freezers with IceMaker. Source: Use and Care Manual (V: 01_2025), checked November 2026. No other cached manual prints F3.
If F3 appears in the display, the guide says the appliance has a problem and asks you to have the number ready when you call service.
Copy F3 and the model.
F3 showing on the display is enough. The guide gives no steps to clear it.
Applies to the Liebherr HCB 2092G / CBS 2092G NoFrost combined refrigerator-freezers with IceMaker.
The manual prints all five with one meaning and does not separate them, so the difference is for the technician to read.
The HCB 2092G and CBS 2092G NoFrost combined refrigerator-freezers with IceMaker.
Liebherr alarms, symptoms, cooling parts, repair visits
The Power failure LED on a Liebherr HCB 2092G or CBS 2092G means the freezer temperature rose too high in the last hours or days because of a power failure. The freezer display flashes too. Touch the alarm icon to read the highest temperature, and check the food.
If a Liebherr refrigerator is not cold enough, the user guides list the same few causes: the door is not closed properly, the room is too warm, the door has been opened too often or too long, the temperature is set too warm, a heat source is close, or too much fresh food went in. Check those first. If it stays warm, book a technician.
Book a diagnostic for your exact model, carried out beside the unit.
Office details, plus the access notes to pass on to us.