Inside the appliance
BioFresh drawers. In plain English.
BioFresh is Liebherr's drawer zone just above freezing, 0 to 3 °C (32 to 37 °F) on the CBNsth 779i. You adjust it with the BioFresh B-Value, B5 on delivery. B1 to B4 can bring the zone to 0 °C, where food could freeze.

Where it fits.
BioFresh drawers in the appliance
A drawer zone in the fridge section. The CBNsth 779i overview shows where the BioFresh drawers sit.
The image shows a typical example of this part. It does not say which replacement fits your model.
What changes when the cooling system needs attention.
BioFresh drawers problems can show up as warmer shelves or an alarm that keeps returning. The part is tested before anyone decides it is the cause.

Liebherr refrigerator not cold enough
If a Liebherr refrigerator is not cold enough, the user guides list the same few causes: the door is not closed properly, the room is too warm, the door has been opened too often or too long, the temperature is set too warm, a heat source is close, or too much fresh food went in. Check those first. If it stays warm, book a technician.

Liebherr refrigerator does not work, display is off
When a Liebherr refrigerator does not work or its display is off, the guides list a short set of checks: whether the appliance is turned on, whether the power cord is properly inserted, whether the circuit breaker or fuse is in order, and on Touch & Swipe models whether the IEC socket is plugged in. If those pass, book a technician.
Owner care, within the model instructions.
Unplug the appliance before any check of your own. Watch for meltwater on the floor and for frost-covered shelves that can stick to skin. Never touch a wet plug, open a cover or go beyond what your model's owner manual allows.
- 1
Read the B-Value
Liebherr says it is set to B5 on delivery. B9 is the highest temperature and B1 the lowest.
- 2
Nudge one step
Liebherr says to use the B-Value to adjust the zone slightly warmer or colder if the room demands it.
- 3
Check the content
At B1 to B4 food could freeze, so look for frozen produce before you call.
Cleaning or replacement?
Leave internal testing to a technician.
Food freezes at B5 or above.
The BioFresh zone feels warmer than the setting and the door seals look fine.
Arrange a diagnosticSources and model boundaries.
These documents support the BioFresh drawers guidance. Pick the manual that matches your model.
- User Guide
- User Guide
- Use and Care Manual For “NoFrost” Combined Refrigerator-Freezers with IceMaker
Keep the manual for your exact model handy. See how we research these pages.
What temperature is BioFresh?
On the CBNsth 779i guide: 0 to 3 °C (32 to 37 °F). Fish & Seafood safe models go to -2 °C (28 °F).
What is the B-Value?
A setting that makes BioFresh slightly warmer or colder. Liebherr's pre-set value is B5.
Can I take the drawers out?
Yes. The HCB 2092G cleaning steps show how to remove the BioFresh drawers.
Why is my lettuce frozen?
Liebherr says B1 to B4 can bring the temperature down to 0 °C, where foods could easily freeze.
Liebherr alarms, symptoms, cooling parts, repair visits
From the message to what to do next.
Liebherr refrigerator not cold enough
If a Liebherr refrigerator is not cold enough, the user guides list the same few causes: the door is not closed properly, the room is too warm, the door has been opened too often or too long, the temperature is set too warm, a heat source is close, or too much fresh food went in. Check those first. If it stays warm, book a technician.
Refrigerator repair
Book a diagnostic for your exact model, carried out beside the unit.
Find your metro
Office details, plus the access notes to pass on to us.

