Troubleshooting

Bubbles, hums and clicks most of them are the cooling at work

Most sounds a Liebherr makes are listed as normal: bubbling, hissing, humming, whirring and clicking. Vibration and clattering are the two error noises, and the manual's fixes are to level the feet and to secure loose items inside. [1][2][3]

A technician in work clothes crouches beside an open built-in freezer full of drawers, a yellow spirit level on the floor.
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work
On this page
Key points
  • Normal: bubbling, splashing, spitting, hissing, humming, whirring, clicking and valve noises. 123
  • Higher output means more sound: fresh food, running fan, warm room, door open long, extra functions. 1
  • Error noises: vibration (level the feet) and clattering (secure items, leave a gap). 123
  • After a door alarm the appliance cools harder, and noises can be louder for a while. 1

Which noises are normal on a Liebherr?#

Bubbling, splashing, spitting, hissing, humming, whirring, clicking and a faint knocking or buzzing are all printed as normal on the SF 5291 freezer, and the URh 375i and W5250 manuals list the same sounds. Vibration and clattering are the exceptions. 123

The short version is that a working cooling appliance is not silent. Liebherr's manuals say the appliance makes noises while in operation, and add a table that sets each sound next to its cause. Here it is, in plain words.

SoundWhat Liebherr says is happeningVerdict
Bubbling and splashingCoolant is flowing into the cooling circuitNormal noise
Spitting and hissingCoolant is spraying into the cooling circuitNormal noise
HummingThe appliance cools; volume depends on the outputNormal noise
Whirring and murmuringThe fan is runningNormal operating noise
ClickingComponents are switching on and offNormal switching noise
Rattling, humming, faint knocking or buzzingA valve is activeNormal switching noise
SippingThe self-closing door is being opened and closed (SF 5291)Normal noise
VibrationUnsuitable setupError noise
ClatteringEquipment or objects inside the applianceError noise

The SF 5291 manual includes the sipping sound for its self-closing door. 1 The W5250 and URh 375i list the same other rows. 23

Why is it louder some days than others?#

The volume follows the cooling output. At low output the appliance saves energy, takes longer to cool and is quieter; at high output the food cools faster and the noise is higher. 123

Liebherr gives five examples of what raises the output: activated functions, a running fan, freshly sorted food, a high ambient temperature and a door opened for long periods. 123 On the SF 5291 two functions are called out by name. SuperFrost and PartyMode make the appliance work at a higher output, so the operating noise may be temporarily louder and energy use rises. 1 The glossary entry for SuperFrost says more about what that function does.

A door left open also leaves a trace. When the door alarm came on, the appliance cools more intensely afterward, so the noises may be louder and the temperature on the display may read higher than it really is. 1 Our guide to the door alarm delay explains that case.

Which functions make a freezer louder, and for how long?#

SuperFrost and PartyMode are the two the SF 5291 manual names. SuperFrost switches itself off after 56 to 72 hours, depending on the volume of stored food, and PartyMode switches itself off after 24 hours. Both can be ended by hand sooner. 1

While either is active, the appliance runs at a higher output, so a louder hum is expected and energy use goes up. 1 Once the function ends, the freezer settles back to its normal level of sound. If you start SuperFrost before a big shopping trip, as the manual suggests for a large load, plan on a day or two of a more audible compressor.

How do I stop a vibrating sound?#

Level the appliance. The SF 5291 and W5250 manuals say to adjust the feet until the appliance is horizontal. The URh 375i says to check the installation and set the appliance up again. 123

Vibration is on Liebherr's list as an error noise with a setup cause, and that is why the remedy sits with the installation and not inside the appliance. Look for a tilt, for a foot that does not touch the floor and for a neighboring cabinet or wall that the appliance touches. Turn one foot slightly, then listen before you touch the next.

  1. 1

    Find where the sound comes from#

    Press a hand against the side panel and the front. A buzz that stops under pressure may mean the appliance is touching something.

    A tall stainless freezer column with its door closed, set into wood cabinetry in a kitchen at dusk.
  2. 2

    Adjust the feet#

    Turn the adjustable feet until the appliance is horizontal, as the SF 5291 and W5250 manuals say. 13

    A hand turns the threaded adjustable foot under a freezer column, a small spirit level on the floor beside it.
  3. 3

    Check the installation#

    The URh 375i manual tells you to check the installation and set the appliance up again. 2

  4. 4

    Listen again#

    Wait for one cooling cycle before you decide the change worked.

The press-a-hand step is our own addition for finding the source. The manual's steps are the two about feet and installation.

How do I stop clattering?#

Secure the equipment parts and leave a gap between items. Liebherr lists clattering as an error noise caused by equipment or objects inside the appliance, with those two remedies. 123

In a freezer, that can mean loose boxes, bottles or trays touching the walls or each other. Move them apart, push drawers fully home and make sure a tray is seated on its rails.

  1. 1

    Empty one shelf or drawer at a time#

    Stop when the sound stops, so you know which item or tray caused it.

  2. 2

    Secure the equipment#

    Shelves, trays and drawers should sit firmly. 123

  3. 3

    Leave a gap between items#

    Do not pack objects tightly against each other or the wall. 123

    A hand slides a frosted cardboard box inside a freezer drawer, leaving a gap from the metal side wall.

What if the motor seems to run too long?#

Liebherr's troubleshooting tables list this as its own problem and give owner checks. The HW manual asks whether the ambient temperature is too hot and whether the appliance was opened too often or left open too long. 4

The Monolith freezer manual adds two more: a big load of new food, and PartyMode left on, so verify it is in normal operation mode. 5 A running motor can sound like a noise problem when it is really a workload one, and the cause is in the list above: freshly added food, a warm room, a door left open. Check these before you conclude that something is wrong.

Do wine cabinets sound different?#

The W5250 manual prints the same noise table as the freezer: bubbling and splashing, spitting and hissing, humming, whirring, clicking and rattling are normal, while vibration and clattering are error noises. 3 A wine cabinet adds a fan that may keep running with the compressor idle. 4

The HW manual says that is a normal operating state that depends on the interior temperature and the room temperature, and it separately describes a Ventilation button that raises humidity by running the fan. 4 So a fan you can hear in a wine cabinet is no cause for alarm. A bottle that hums against a neighbor, on the other hand, falls under the clattering and vibration remedies above: secure the contents and leave a gap.

At what point should a technician listen?#

When you have tried the two fixes and the noise remains, when it is a new sound that does not fit the table, or when it comes with a warm interior or a message on the display. The manuals offer no further owner steps. 123

Liebherr and our company are unrelated businesses. A unit under Liebherr's own warranty goes back through Liebherr; for other units, book a visit and describe the sound, when it happens and what the display shows. Before the technician starts, the two of you settle the amount, and the diagnostic at your home fixes the exact cost. Visit details sit on the freezer service page, the refrigerator page and the wine storage page. If a message appears with the noise, check the freezer Error row.

Does the sound of frost or dripping count as a noise?#

Water droplets or a thin layer of frost or ice on the rear wall of a refrigerator are described as a completely normal part of how the appliance works. The URh 375i manual says you do not have to remove them. 2

That page covers refrigerators with automatic defrosting, and the drain hole needs regular cleaning. 2 For a freezer, the SF 5291 manual describes an automatic defrost cycle that you can also start by hand, and our NoFrost defrosting entry explains the idea. 1

Sources#

  1. User GuideLiebherr-Hausgeräte (US market edition; linked from https://www.liebherr.com/en-us/p/sfnsth-529i-3033451) · PDF created 10.11.2025; file tag SFNsth529i_237; cover: SF 5291; US product page SFNsth 529i · PDF pages 13-14, 22, 31-32
  2. User GuideLiebherr-Hausgeräte (US market edition; linked from https://www.liebherr.com/en-us/p/urh-375i-3033413) · PDF created 07.09.2026; file tag URh375i_137; US product pages URh 365i, URh 375i · PDF pages 25-26
  3. User GuideLiebherr-Hausgeräte (US market edition; linked from https://www.liebherr.com/en-us/p/wpsd-5252-3033484) · PDF created 07.07.2025; file tag WPsd5252_137; cover: W5250 (freestanding wine cabinet); US product page WPsd 5252 · PDF page 24
  4. Use and Care Manual for Wine CoolerLiebherr-Hausgeräte (US market edition; linked from https://www.liebherr.com/en-us/p/ewtdf-3553-3033487) · PDF created 31.01.2025; file tag EWTdf3553_137; cover: HW 3000, HW 4800, HW 8000, 7085 007-01; V: 01_2025 · PDF page 16
  5. Use and Care Manual FreezerLiebherr-Hausgeräte (US market edition; linked from https://www.liebherr.com/en-us/p/efnhi-9971-3033453) · PDF created 07.04.2026; file tag EFNhi9971_237; cover: MF 1851 / MF 1861 / MF 2451 / MF2461 / MF 3051 / MF 3061 / MF 3651 / MF3661, 7085 979-01 · PDF page 29

Here to help

Good questions.
Clear answers.

Talk to our team
Is a bubbling sound inside my Liebherr a leak?

Not according to Liebherr's manuals. Bubbling and splashing is listed as normal: coolant is flowing into the cooling circuit. Spitting and hissing are normal for the same reason, coolant spraying inside the circuit. Neither points to a water leak. [1][2][3]

Why is my freezer louder after I added a lot of food?

Freshly sorted food is one of the examples Liebherr gives for higher cooling output, which means a higher noise level. SuperFrost and PartyMode also raise the output and can make the appliance temporarily louder. Quiet returns once it catches up. [1]

What does a vibrating sound mean?

Liebherr lists vibration as an error noise, caused by unsuitable setup. The SF 5291 and W5250 manuals say to adjust the feet until the appliance is level, and the URh 375i says to check the installation and set the appliance up again. [1][2][3]

The fans run even though nothing seems to be cooling. Is that wrong?

The HW wine cooler manual lists this as a normal operating state when the fan function is off and the compressor is idle. It depends on the interior and room temperature. For other models the manuals say a running fan is a whirring, normal sound. [1][4]

Which noise tells me to book a visit?

Liebherr's tables list vibration and clattering as error noises, and each has a fix you can try first: level the feet, or secure loose items and leave gaps. If the noise remains after those, or is new and loud, a technician should listen. [1][2][3]

Let’s take care of it.

Food and wine do not wait.
Book the check.