What it means
Error on a Liebherr Touch & Swipe refrigerator means an appliance module reports an error. Touch the display to read the code and write it down. The guides print no code values, so book a technician with us and give the code.
Liebherr refrigerator Error / Control board and communication
Error on a Liebherr Touch & Swipe refrigerator means an appliance module reports an error. Touch the display to read the code and write it down. The guides print no code values, so book a technician with us and give the code.
Also shown as Error
Error on a Liebherr Touch & Swipe refrigerator means an appliance module reports an error. Touch the display to read the code and write it down. The guides print no code values, so book a technician with us and give the code.
The guide offers no home steps.
Error appears on the display.
Your Liebherr steps, stored on this device alone

Touch the display briefly. The error code appears.

Note the code exactly as shown, touch the display again to return to the status display, and add the model.

The guide ends this sequence by pointing to Liebherr's own service. With us, book a technician and read out your note.
Give us the model number and what you have already tried, then start your request below.
Book a visitA simplified drawing of a cooling unit; the inside differs between built-in, freestanding and column models. Tap any outlined part to open its photo and the check that belongs to it.

Component reference
Liebherr Touch & Swipe models are run from a touch display.
Read the definitionError appears if there is an appliance error: an appliance module indicates it. The guide has you note the code; it prints no list of code values.
Read the supporting manualBegin with the first check: touch the display briefly. The error code appears.
Read the supporting manualThe guide offers no home steps. Keep the doors closed and check that the contents are cold.
Read the supporting manualError is a Touch & Swipe message. Monolith MRB refrigerators show Failure XX0000, and the HCB 2092G shows F1 to F5.
Read the supporting manualManufacturer document
Liebherr-Hausgeräte (US market edition; linked from https://www.liebherr.com/en-us/p/urh-375i-3033413)
Models: URh 365i, URh 375i
PDF creation date Mon Sep 7 12:00:27 2026 EEST; file tag URh375i_137; US product pages URh 365i, URh 375i / PDF p. 19
Manufacturer document
Liebherr-Hausgeräte (US market edition; linked from https://www.liebherr.com/en-us/p/cbnsth-779i-3033402)
Models: CBNsdh 776i, CBNsth 579i, CBNsth 779i
PDF creation date Tue Sep 2 21:46:12 2025 EEST; file tag CBNsth779i_137; US product pages CBNsdh 776i, CBNsth 579i, CBNsth 779i / PDF p. 32
Manufacturer document
Liebherr-Hausgeräte (US market edition; linked from https://www.liebherr.com/en-us/p/msdhi-9514-7028595)
Models: MSdhi 9514
PDF creation date Fri Sep 25 11:19:46 2026 EEST; file tag Msdhi9514_337; US product page MSdhi 9514 (French-door) / PDF p. 26
Applies to Liebherr Touch & Swipe refrigerators and refrigerator-freezers (URh 365i / 375i, CBNsth 779i family, MSdhi 9514). Sources: three User Guide files, checked November 2026. The numeric codes behind the message are not published.
Error appears if there is an appliance error: an appliance module indicates it. The guide has you note the code; it prints no list of code values.
Touch the display briefly. The error code appears.
Any of these: Error appears on the display.
Applies to Liebherr Touch & Swipe refrigerators and refrigerator-freezers (URh 365i / 375i, CBNsth 779i family, MSdhi 9514).
Touch the display briefly to read it. No Liebherr table in the guides explains the numbers.
Touch & Swipe refrigerators and refrigerator-freezers such as the URh 365i, URh 375i, CBNsth 779i family and MSdhi 9514.
Liebherr alarms, symptoms, cooling parts, repair visits
Failure XX0000 on a Liebherr Monolith MRB refrigerator is the Device failure screen: a failure number appears, and Liebherr's text tells you to pass it to service. The digits are not decoded. Keep the number with the model and arrange a visit.
If a Liebherr refrigerator is not cold enough, the user guides list the same few causes: the door is not closed properly, the room is too warm, the door has been opened too often or too long, the temperature is set too warm, a heat source is close, or too much fresh food went in. Check those first. If it stays warm, book a technician.
Liebherr Touch & Swipe models are run from a touch display. You tap to confirm, hold for about 3 seconds to switch a function, and swipe to move through menus. After 1 minute untouched it dims to sleep mode, and after 10 seconds it steps back a menu. A warning on it is read by touching the display.
Book a diagnostic for your exact model, carried out beside the unit.
Office details, plus the access notes to pass on to us.