What it means
Connection failure on a Liebherr Monolith MRB refrigerator means a connection is disabled. The guide says there is no need to move items to another appliance. Note the failure number, then arrange a technician visit.
Liebherr refrigerator Connection failure / Control board and communication
Connection failure on a Liebherr Monolith MRB refrigerator means a connection is disabled. The guide says there is no need to move items to another appliance. Note the failure number, then arrange a technician visit.
Also shown as Connection failure
Connection failure on a Liebherr Monolith MRB refrigerator means a connection is disabled. The guide says there is no need to move items to another appliance. Note the failure number, then arrange a technician visit.
The guide says there is no need to move items to another appliance, so the refrigerator can keep running while you book a visit.
Connection failure shows on the display.
Your Liebherr steps, stored on this device alone

The screen reads Connection failure and notes that the connection is disabled.

The guide states there is no need to move any items to another appliance.

Write down the failure number shown and the model, then book.
Give us the model number and what you have already tried, then start your request below.
Book a visit
A simplified drawing of a cooling unit; the inside differs between built-in, freestanding and column models. Tap any outlined part to open its photo and the check that belongs to it.
Connection failure means the connection is disabled. The menu keeps showing the message until service has rectified it.
Read the supporting manualBegin with the first check: the screen reads Connection failure and notes that the connection is disabled.
Read the supporting manualThe guide says there is no need to move items to another appliance, so the refrigerator can keep running while you book a visit.
Read the supporting manualConnection failure is a Monolith MRB message. WLAN error belongs to Touch & Swipe refrigerators and concerns the home network.
Read the supporting manualManufacturer document
Liebherr-Hausgeräte (US market edition; linked from https://www.liebherr.com/en-us/p/erbhi-9670-3033413)
Models: MRB 2400, MRB 2410, MRB 3000, MRB 3010, MRB 3600, MRB 3610
PDF creation date Fri Oct 13 12:59:28 2023 EEST; file tag ERBhi9970_137; cover: MRB 2400 / MRB 2410 / MRB 3000 / MRB 3010 / MRB 3600 / MRB 3610, 7085 975-01 / PDF p. 17
Applies to Monolith refrigerators MRB 2400 / 3000 / 3600. Source: Use and Care Manual For Refrigerators, checked November 2026.
Connection failure means the connection is disabled. The menu keeps showing the message until service has rectified it.
The screen reads Connection failure and notes that the connection is disabled.
Any of these: Connection failure shows on the display.
Applies to Monolith refrigerators MRB 2400 / 3000 / 3600.
The guide says there is no need to move items to another appliance.
No. WLAN error is a Touch & Swipe network message.
Liebherr alarms, symptoms, cooling parts, repair visits
Failure XX0000 on a Liebherr Monolith MRB refrigerator is the Device failure screen: a failure number appears, and Liebherr's text tells you to pass it to service. The digits are not decoded. Keep the number with the model and arrange a visit.
If a Liebherr refrigerator is not cold enough, the user guides list the same few causes: the door is not closed properly, the room is too warm, the door has been opened too often or too long, the temperature is set too warm, a heat source is close, or too much fresh food went in. Check those first. If it stays warm, book a technician.
Book a diagnostic for your exact model, carried out beside the unit.
Office details, plus the access notes to pass on to us.